Please note that when your iPhone is plugged into the headset, the headset’s battery will charge the phone as long as the headset is on. Therefore you can simultaneously charge both your phone and headset when connected to the charging cable.
In addition, please note that plugging the headset into the power cable will turn the device on, so that it is able to pass charge to the phone.
To ensure your device is fully charged we recommend the following best practices:
- When the headset isn’t being worn, plug it into the charging cable and block that was sent with your headset.
- For full charge, allow up to 6 hours of uninterrupted charging time.
- When you remove your headset from the charger the headset will remain ON. If you are not going to be using the headset right away, turn off the headset by pressing the button below. The led indicator will blink white and then the light will turn off, meaning that the device is in its OFF state.
- You can expect the battery to last approximately 8 hours if the headset is on, but not in use.
Setting up a charging station
We recommend creating a dedicated area or hook for the headset that will be easy to return the headset to and that encourages headset users to plug in the headset when it is not in use.
For full detail on what the LED states look like during and after charging please refer to this article: Prism Pro LED Color States.